Vicon Roughneck V920D Series Instalační příručka stáhnout pdf (Strana 16)

2.2 Connections

 Connection Description

No.

Connector Name

Description

Micro-SD Slot

Micro-SD memory slot

Service Monitor

Port

Service Monitor (set to NTSC by default ; change video format from

Source menu) & OSD Controller Communication Port, Mono Jack

Audio In & Out

Port

Audio Input and Output, Mono Jack.

V920D-AUDIO cable assembly is available as an option.

Alarm In & Out

Port

Alarm Input and Output, 3 pin terminal

Pin 1: Alarm In

Pin 2: GND

Pin 3: Alarm Out

Main Power

Main Power, 2 pin terminal,

12 VDC: 470 mA (5.4 W), 24 VAC: 520 mA (6.5 W) IR on, without

heater, or

12 VDC: 900 mA (10 W), 24 VAC:

900 mA (11.8 W) with IR and

heater

Pin 1: 12 VDC/24 VAC, Pin2: GND/24 VAC

6 RJ-45 Port

Ethernet, RJ-45 port compatible with 10/100 Mbps having PoE

functionality

 Micro SD memory slot on the Board

Card Slot for Micro SD memory: Socket “J15”

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network camera. Generally a

crossover cable is used for direct connection to a PC, while a direct cable is used for connection

to a hub.

A router featuring PoE (Power over Ethernet) can also be used to supply power to the camera.

• Connecting Alarms

AI (Alarm In):

External devices can be used to signal the network camera to react upon events. Mechanical or

electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.

G (Ground):

Set to NTSC

by default

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 81 82

Komentáře k této Příručce

Žádné komentáře

Vicon Roughneck V920D Series Instalační příručka Strana 16

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní kamery Vicon Roughneck V920D Series