Vicon Roughneck V920D Series Instalační příručka

www.vicon-security.com XX258-00-07Roughneck V920D SeriesNetwork Camera DomesVicon Industries Inc. does no

Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier responsibility to deliver the equip

Torx screws M5x10 (4x) Accessory Kit There is an accessory kit included with the Roughneck V920D-IP. The table below lists the contents. Description

2. Using the drilling guide as a template, mark the location of the four mounting holes [0.203 in. (5.2 mm) diameter]. See Figure that follows. Mo

Installation Options 5. Fasten the base to the wall or ceiling with the appropriate hardware for the mounting surface, lag bolts and sleeve for ceme

Seal around the housing base tightly using the silicone. Note: To assure a watertight seal, apply silicone sealant around the area where the base me

 Camera Dimensions See the diagrams below for the exact dimension of the network camera dome. Dimensions Unit: mm 15

2.2 Connections  Connection Description No. Connector Name Description 1 Micro-SD Slot Micro-SD memory slot 2 Service Monitor Po

Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector. Alarm Out: The network camera can activate external d

▶ ID & IP assignment To make changes in the OSD menu, the optional OSD controller (V920-OSD) can be used to set Camera Title and IP Address. 1.

2. Start SmartManager utility (Start>All Programs>SmartManager>SmartManager); the main window displays. After a short while any network devi

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPM

3. Operation The network camera can be used with Windows® operating system and browsers. The recommended browsers are Internet Explorer®, Safari®, Fi

3.2. Access from the internet Once connected, the network camera is accessible on your local network (LAN). To access the network camera from the Int

1) General controls Live View Page Search & Playback Page Setup Page Help Page The video drop-down list a

3) Video Streams The network camera provides several image and video stream formats. Your requirements and the properties of your network will determ

3.5 Network Camera Setup This section describes how to configure the network camera and is intended for product Administrators, who have unrestricted

1) Users User access control is enabled by default. An administrator can create additional users and passwords. It is also possible to allow anonymous

2) Network The network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must

3) Video & Image • Stream1 Setting - Codec: The codec settings are separated into MPEG4 and H.264. H.264

* H.264 BP (Baseline Profile): Originally intended as the mainstream consumer profile for broadcast and storage applications, the importance of thi

• Stream2 Setting Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control the b

FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,

• Audio Setting - Enable audio: Check the box to enable audio in the video stream. - Compression type: Select the desired audio c

5) Date & Time • Current Server Time This displays the current date and time (24h clock). The time can be displayed in 1

3.5.2 Live View, Source Use the Video Mode drop-down list to select the video input mode, NTSC or PAL. This defines the Video Output Port for the Ser

3.5.3 Video & Image  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for details. 33

 Image Image Appearance This page provides access to the advanced image settings for the network camera. -

 AE & AWB • Exposure Control This page provides access to set the exposure and white balance of the net

* 60Hz: Select at 60 Hz environments. - Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera. * Max. S

• Day & Night Control - Mode: Select the day/night mode from three modes. * Automatic: Normally works in day mode; switches automatic

The privacy masks are configured using Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize, delete, or

3.5.4 Audio Refer to “3.5.1 Basic Configuration > Audio” for details. 39

IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do n

3.5.5 Event 1) Event-In  On Boot This is used to trigger the event every time the network camera is started. Select “Enable o

 Alarm In Select “Enable alarm in port 1” to activate the alarm event. The network camera supports 1 alarm input port. - Typ

 Manual Trigger This option makes use of the manual trigger button provided on the Live View page, which is used to start or st

 Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of

To create a motion or mask window, follow the steps below: 1. Click the right button of mouse to display the mouse menu. 2. Select New Motion

 Network Loss This is used to trigger the event every time the network connection is failed. Select “Enable network loss” to

2) Event-Out  SMTP (E-Mail) The network camera can be configured to send event and error email messages via SMTP (Simple

- Login Method: Set the weakest method allowed to the highest/safest method supported by the mail server. The most secure method is listed in t

- Remote directory: Specify the path to the directory where the uploaded images will be stored. If this directory does not already exist on the F

• HTTP Server Setting - URL: The network address to the server and the script that will handle the request. For example: http://192.168.12

Contents 1. Description ------------------------------------------------------------------ 6 1.1 Components -- --------------------------------

▼ Audio Alert When the network camera detects an event, it can output a predefined audio data to external speaker. Check the &q

▼ Record When the network camera detects an event, it can record the video stream onto the Micro SD Memory (not s

• Record Schedule The weekly recording schedule can be set for each day. Drag or click a box area; clicking the block toggles the recording between

▼ Event Notification When the network camera detects an event, it can send a message to a designated server that this event has occur

The event map allows you to change the settings and establish a schedule for each event trigger from the network camera; up to a max. 15 events can be

3.5.6 System 1) Information You can enter the system information. This page is very useful as a reference for device information after installation.

2) Security  Users User access control is enabled by default, when the administrator sets the root password on first access. Ne

 HTTPS For greater security, the network camera can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure So

 IP Filtering Checking the "Enable IP address filtering" box enables the IP address filtering function. When the IP a

3) Date & Time • Current Server Time This displays the current date and time (24h clock). The time can be displayed in 12

1. Description The information in this manual provides quick installation and setup procedures for the Roughneck® V920D Series of Camera Domes. These

4) Network Setting regarding the network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be es

• IPv6 Address Configuration Check this "Enable IPv6" box to enable IPv6. Other settings for IPv6 are configured in the network rou

 DDNS • Internet DDNS (Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable network

 RTP Create a setting for sending and receiving an audio or video on a real-time basis. These settings are the I

- RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower value. However, if a network status is poor, enter a

 QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can b

• Automatic Traffic Control Check the box to enable automatic traffic control. Set a limitation on user network resources by designating the ma

• NAT Settings - Enable – Check this box to enable NAT traversal. When enabled, the network camera attempts to configu

 Zeroconfig Zeroconfig allows the network camera to create and assign the IP address for network cameras and connect to a network automatically.

 Bonjour The network camera includes support for Bonjour. When enabled, the network camera is automatically detected by operating systems and client

1.2 Key Features • Brilliant video quality The network camera offers the highly efficient H.264 video compression, which drastically reduces bandw

5) Language Select a user language. The language choices are English, Korean and Russian. 70

6) Maintenance • Maintenance - Restart: The unit is restarted without changing any of the settings. Use this metho

• Backup Click the Backup button to save setting values that users enter to the network camera to a user PC. • Restore Click the Restor

3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, and the ev

Go to Last: go to the last of the video clip. Clip Copy: copy the video clip. Digital Zoom: zoom in the video clip Full Screen: dis

3.7 Help The Help information window is provided as a popup window so that users can open and read it without a need for log-in. It offers descriptio

3.8 Resetting to the factory default settings To reset the network camera to the original factory settings, go to the Setup>System> Maintenance

4. Appendix 4.1 Troubleshooting When troubleshooting if problems occur, verify the installation of the network camera with the instructions in this

4.2 Alarm Connection The following connection diagram gives an example of how to connect a network camera. 4.3 Preventive

4.4 Product Specification Main Item Specification C A M E R A Image sensor 1/2.8” Progressive scan RGB CMOS Active Array 1920 (H) x 1080 (V) Lens Moto

2. Installation For the network camera to operate, it is necessary to connect a network cable for data transmission and power connection from custome

Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at

Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship u

Vicon Industries Inc. For office locations, visit the website: www.vicon-security.com

 Parts and Description (Models equipped with IR LEDs) 9