Vicon V960D Series Instalační příručka

www.vicon-security.com XX224-30-07V960D Series Network Indoor Camera DomesVicon Industries Inc. does not

3. Accessing the Camera The V960D can be accessed with most standard operating systems and browsers. The recommended browser is Internet Explo

When you first access the camera you will be asked to download and install an Active X control from the camera to display a Live image.

3.2 Accessing the Camera from the Internet Once installed, the camera will be accessible on the Local Area Network (LAN). Then you must configur

3.4 Live View Client PC Speaker (enable/disable) Client PC Microphone (enable/disable) Digital Zoom Snapshot Full Screen Vide

Multicasting is bandwidth-conserving technology that reduces bandwidth usage by simultaneously delivering a single stream of information to multiple n

4. Setup The V960D is configured from the Setup tab, which is available on the upper-left hand side in the web interface. This configuration could b

5. Installation The following descriptions show examples of some of the features available with V960D. 5.1 Installation Mode Installation Mo

6. Video The following descriptions show examples of some of the features available with V960D. 6.1 Video Codec This section allows you to choos

Size Video output resolution. See below for camera resolution tables. Frame Rate 2.5 ~ 30fps in normal mode (1 ~ 30fps in slow shutter mode)

Bandwidth Limit Limit the bandwidth that the V960D can use during a network connection. Max Bandwidth Specify the maximum bandwidth that the V96

Contents 1. Product Features ... 4 2. Installation ...

6.2 Camera This section allows you to adjust various camera settings. 6.2.1 Exposure Control Exposure Mode AUTO: Use this setting f

Slow Shutter Mode For low light conditions, turn ON slow shutter mode. Max AGC Gain For low light conditions, select HIGH value; otherwise select LOW

6.2.4 Image Property Control Modify the video signal parameters, such as: Brightness, Sharpness, Contrast, Color, and Hue. Brightness (0 ~ 30;

7. Audio The V960D can transmit audio to other clients and can also play audio received from other clients. This section describes the basic audio

8. Live The V960D can support up to 10 simultaneous users via Unicast. With multicasting, V960D can support an unlimited number of users. If sup

9. SD Card 9.1 Configuration SD Card Configuration This configuration page allows you to save video and still images to the Micro SD (S

9.2 Event Event SD Writing You can configure the camera to store still images based on events such as Alarm In and Motion detection. NOTE:

SD Write Mapping Choose which types of events (Alarm In or Motion) will be recorded to the SD card by checking the desired event. Effective Perio

10. FTP 10.1 Configuration Server Configuration Enable/Disable the FTP function to download saved content from the SD Card remotely. Wh

Event FTP Sending Allows transmission of still images to the FTP server at remote sites when an event occurs. NOTE: This function cannot be used

11.2 Motion ... 30 11.3 Mapping ...

11. Event 11.1 Alarm Port Alarm Input (dry contact) Used for connecting external alarm contacts and triggering specific alarm-based events. T

11.2 Motion Motion Detection Motion detection is used to generate an alarm whenever movement occurs within the video image. A total of 4 mot

11.3 Mapping Event Mapping It is possible to define conditions that would cause the camera to respond with certain actions. A triggered event h

12. Network 12.1 IP Setup IP Address Configuration The V960D supports both IP version 4 and IP version 6 (IPv6 will be supported as of

How to Assign an IP Address Default setting is set to “DHCP” and “UPnP” function is set to ON. If your network has a DHCP server and the UPnP functi

12.2 Service Port Service Port HTTP Port The default HTTP port number (80) could be changed to any port within the valid port range (1-65535

12.3 RTP RTP Port Range The IP address, port numbers, and Time-To-Live (TTL) value are for use for the video stream(s) in Multicast H.264 for

You must turn Notification to ‘ON’ and then enter the host names or addresses for your mail servers in the fields provided to enable the sending of ev

12.6 UPnP Universal Plug & Play (UPnP) allows you to find the IP camera automatically on your network.

In order to be able to detect the camera automatically, you must enable the UPnP function on both the camera and on your PC. Camera : Set UPnP to “

13. System 13.1 User When you access the camera, the Configure Root Password dialog box appears. Enter the user name ADMIN and password 1

12.2 Date & Time Date & Time Format Specify the formats for the date and time (12h or 24h) displayed in the Live View video streams.

13.3 Maintenance System Name Choose a system name to identify the camera when using e-mail notifications. System Reboot Reboots the camera

4. If you suspect the firmware upgrade for the camera has failed, always wait at least 5-10 minutes before restarting the upgrade process. 5. Vico

13.4 Information System Information After updating firmware, you can confirm the new F/W version here.

Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship

Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vic

1. Product Features The V960D Series HD/Megapixel IP camera dome is a high performance H.264 network camera, designed for demanding security insta

1. Network Connector The V960D connects to the network via a standard network cable and automatically detects the speed of the local network segme

4. Micro SD Card Save snapshot images and video onto a Micro SD card. 5. Reset Button Press this butto

2. Installation Select a location for the installation of the V960D camera. Be sure the area around the selected location is clear of obstacles (s

Mounting the Unit 1. Secure the bottom cover to ceiling/wall with the two supplied tapping screws (4x30). 2. Attach the unit to the bottom cover an