Vicon XX247-20-04 Uživatelská příručka

www.vicon-security.com XX247-00-05V-CELL High-Security Corner-Mount CamerasVicon Industries Inc. does no

When using rear cover, follow diagram below. 1. Use rear cover as template to mark mounting and cable access hole

- IP Camera - Analog Camera 11

- IP Camera - Analog Camera 12

2.3 Unpacking and Inspection All Vicon equipment is inspected and tested before leaving the factory. It is the carrier’s responsibility to deliver th

interior of the housing is required later. Additionally, a rear cover is supplied for those installations requiring Canadian UL compliance or extra pr

Cable Connections All cabling is done to the boards located on the back of the front plate. Note: Vicon systems and components, like most electronic

OSD Menu for Analog Camera Settings can be made using the contact switch on the plug in controller. CAMERA OPERATION WITH OSD <MAIN MENU> E

OSD MAIN SCREEN All OSD operation is via the contact switch on the plug in controller. [CENTER] Turn OSD menu ON or to go into Sub Menu

<COLOR SET> Press the [ENTER] button to access the “COLOR SET” mode 1) WB MODE: The White Balance provides settings of AWC (default), ATW, Manu

6) 3D DNR: 3D DNR OFF/LOW/MIDDLE/HIGH Setting (Adjust NOISE when low light condition) 7) D_ZOOM: D_ZOOM ON/OFF Setting. Adjustable from X1.0 to X3

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VE

shapes. Mask color setting (Can change the color of hidden part). This function sets certain areas of the screen to be hidden. The image is divided i

2.5 Network Connection and IP assignment The V-CELL-IP camera is designed for use on an Ethernet network and requires an IP address for access. Most

4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address. Note: For more information, refer to the Smart

3.2. Access from the internet Once connected, the V-CELL-IP Camera is accessible on your local network (LAN). To access the

Note: The default administrator username is “ADMIN” and password is “1234”. If the password is lost, the Network Camera must be reset

1) General controls Live View Page Search & Playback Page Setup Page Help Page The video drop-down list a

4) Camera Setup Settings can be made using the virtual keypad of the camera menu toolbar in the live view page or contact switch on the plug

3.5 Network Camera Setup This section describes how to configure the V-CELL-IP Camera. It is intended for Administrators, who have unrestricted acces

User Group Authority Guest Provides the lowest level of access, which only allows access to the Live View page. Operator An operator can view the Live

- Subnet mask: Specify the mask for the subnet the Network Camera is located on. - Default router: Specify the IP address of the default rou

FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PU

* H.264 MP (Main Profile): Primarily for low-cost applications that require additional error robustness, this profile is rarely used in videoconfer

- GOP size: Select the GOP (Group of Picture) size. If users want to have a high quality of fast images one by one, decrease the value. For the pur

The Network Camera can transmit audio to other clients using an external microphone and can play audio received from other clients by attaching a spea

5) Date & Time • Current Server Time This displays the current date and time (24h clock). The time can be displayed in

3.5.2 Video & Image  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details.

 Privacy Masking - Basic The privacy masking function allows you to mask parts of the video image to be transmitted. You can set up to eight privacy

 Webcasting – Channel1 The Network Camera can stream live video to a website. Copy the HTML code generated on the screen and paste it in page code o

3.5.3 Audio Refer to “3.5.1 Basic Configuration > Audio” for more details. 37

3.5.4 Event 1) Event-In  On Boot This is used to trigger the event every time the Network Transmitter is started. Select “

 Alarm In Select “Enable” to activate the alarm event. The Network Camera supports 1 alarm input port. - Type: Choose the

IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do n

 Manual Trigger This option makes use of the manual trigger button provided on the live view page, which is used to start or

 Motion Select “Enable” to activate the motion window. Motion detection is used to generate an alarm whenever movement

To create a motion or mask window, follow steps: 1. Click the right button of mouse to see the mouse menu. 2. Select New Motion (or Mask) Wind

2) Event-Out  SMTP (E-Mail) The Network Camera can be configured to send event and error email messages via SMTP (Simple

To ensure that the login procedure is performed as securely as possible when using SMTP authentication, you must define the weakest authentication

actively initiates both the FTP control and data connections to the target server. This is normally desirable if there is a firewall between the camer

• HTTP Server Setting - Name: The name of the HTTP event server; use a descriptive name. - URL: The network address to the server and the

▼ Audio Alert When the Network Camera detects an event, it can output a predefined audio data to external speaker. Check the bo

▼ Record When the Network Camera detects an event, it can record the video stream in the Micro SD Memory. Check the box to en

3) Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the Network

Contents 1. Description ------------------------------------------------------------------ 6 1.1 Components -- ---------------------------------

• General Enter the name for a new event map. • Event In Select an event type in the drop down list. • Event Out - E-mail: Select

2) Security  Users User access control is enabled by default when the administrator sets the root password on first access. N

 HTTPS For greater security, the Network Camera can be configured to use HTTPS [Hypertext Transfer Protocol over SSL (Secure

 IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP address en

3) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h

4) Network Setting regarding the network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be

 Basic • IP Address Configuration: - Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets networ

 DDNS • Internet DDNS (Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable networ

 RTP Create a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP address,

 UPnP The Network Camera includes support for UPnP™. UPnP is enabled by default, so the Network Camera is automatically detec

1. Description The information in this manual provides quick installation and setup procedures for the V-CELL series of High-Security Corner-Mounted

 QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can b

• Auto Traffic Control Set a limitation on user network resources by designating the maximum bandwidth. - Maximum bandwidth - When sharing oth

• NAT traversal Settings - Enable - when enabled, the network transmitters attempt to configure port mapping in a NAT

 Zeroconfig Zeroconfig allows the Network Camera to create and assign an IP address for network cameras and connect to a network automatically.

 Bonjour The Network Camera includes support for Bonjour™. When enabled, the Network Camera is automatically detected by operating systems and clien

6) Maintenance • Maintenance Server - Restart: The unit is restarted without changing any of the settings. Use thi

• Restore Click the Restore button to import and apply setting values saved to a user PC. Note: Backup and Restore can only be used on the same

3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event

Clip copy: copy the video clip. Zoom In: zoom in the video clip Full Screen: display full screen of the video. (3) Time Chart Display

3.7 Help The Help information window is provided as a popup window so that users can open and read it without a need for log-in. It offers descriptio

1.2 V-CELL-IP Key Features • Brilliant video quality The Network Camera offers the highly efficient H.264 video compression, which drastically r

3.8 Resetting to the factory default settings To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance

4. Appendix 4.1 Troubleshooting When troubleshooting if problems occur, verify the installation of the Network Camera with the instructions in this

4.2 Alarm Connection The following connection diagram gives an example of how to connect a network camera. 4.3 Preventive M

4.4 Product Specification Main Item Specification Input Voltage 24 VAC, 12 VDC, Power over Ethernet IEEE 802.3af Class2/3 Power Consumption 9.0 Watts

System Requirement for Web Browser Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft Windows XP, or Micr

Vicon Industries Inc. For office locations, visit the website: www.vicon-security.com

2. Installation 2.1 Parts and Description 8

2.2 Quick Installation Below is an overview for installing the V-CELL camera. When using rear cover, refer to the diagram that follows. Detailed inst